Ethernet over Coax Extender with PoE

Model:STHA-IP-POE

IP poe camera converter to analogue

DC52V

Select the number of specifications

Please check the product information you want!

Download Annex

Product Description Data sheet Topology

Description

STHA-IP-S (POE) extends 100Mbps Ethernet data through coaxial cables & RG cables and has POE function. The devices need to be used in pairs. One end is RX and the other end is TX. The RX end device powers the TX end device and POE camera through the coaxial & RG cable. The maximum transmission distance is 900 meters

Features

-STHA-IP-S01(POE) has no handshake protocol and is a non-intelligent POE. It is forced to be powered by 48V or 52V. It must be connected to a POE camera, otherwise it will burn non-POE devices. If a non-POE camera is connected, a POE splitter needs to be added.

-STHA-IP-S02(POE) The RX end inputs 52V voltage and powers the TX end through the coaxial line. The TX end converts the 52V voltage into 12V voltage output and powers the IP camera (non-POE camera).

Description
Transmission parameter	Distance(Meter)	Maximum bandwidth（Mbps)	Maximum output power available to remote devices
	300	92Mbps	18W
	500	86Mbps	13.9W
	800	47Mbps	8.6W
	1000	45Mbps	5.5W
Interface		RJ45×1 ，BNC×1（Support POE ）
Transmission medium		75-5 coaxial cable, RG59
Transmission rate		100Mbps(Maximum bandwidth）
Transmission distance		1000 Meter（Maximum distance）
Support for Ethernet protocol standards		IEEE 802.3i，IEEE 802.3u
Network delay		Less than 20µs for 64-byte frames in Store and forwardmode for 100Mbps to 100Mbps transmission
DC power input		DC 48-52V
Operating environment		Operating temperature; -10℃~ +50℃
		Storage temperature: -20℃~ +70℃
		Operating humidity: 10%-90% non-condensing

No comment

Previous : IP Ethernet over 2-Channel RG Coaxial Converter

Product Description

Description

Features

-STHA-IP-S02(POE) The RX end inputs 52V voltage and powers the TX end through the coaxial line. The TX end converts the 52V voltage into 12V voltage output and powers the IP camera (non-POE camera).

Data sheet

Description
Transmission parameter	Distance(Meter)	Maximum bandwidth（Mbps)	Maximum output power available to remote devices
	300	92Mbps	18W
	500	86Mbps	13.9W
	800	47Mbps	8.6W
	1000	45Mbps	5.5W
Interface		RJ45×1 ，BNC×1（Support POE ）
Transmission medium		75-5 coaxial cable, RG59
Transmission rate		100Mbps(Maximum bandwidth）
Transmission distance		1000 Meter（Maximum distance）
Support for Ethernet protocol standards		IEEE 802.3i，IEEE 802.3u
Network delay		Less than 20µs for 64-byte frames in Store and forwardmode for 100Mbps to 100Mbps transmission
DC power input		DC 48-52V
Operating environment		Operating temperature; -10℃~ +50℃
		Storage temperature: -20℃~ +70℃
		Operating humidity: 10%-90% non-condensing