• 中文
  • English

IP to RG coaxial converter

Model:STHA-IP-S

IP Network Ethernet via RG Line Coaxial Converter

For IP camera system & elevator security system

Analog camera system upgraded to IP camera system

DC12V

IP to RG coaxial converter

选择规格数量

请勾选您要的商品信息!
附件下载

Product Description Data sheet Topology

      STHA-IP-S turns any analog video cable into a high-speed network connection. This allows analog cameras to be replaced with IP cameras without installing any new cabling, resulting in system cost savings of approximately 30-40%. STHA-IP-S converter uses coaxial cables, GR59 RG6 and other cables to extend the transmission of network signals such as IP cameras, routers, IPTV, etc. to a distance of 2KM; and can transmit multiple IP signals simultaneously through one cable. It can solve the problem of short transmission distance of IP cameras, and the installation is simple, labor-saving and requires no optical fiber.


Application scope

Used to transform existing analog video sites, upgrade analog video surveillance to network IP video surveillance; elevator video surveillance; network IP video remote expansion.


Product Name
IP Network Ethernet to BNC Coaxial RG59 Converter
Model
STHA-IP-S
Chipset used
QCA6410
Flash
8Mbit
Transmission Frequency
2M-30M
Interface
BNC interface*1, RJ45 interface*1
Transmission Rate
maximum 100Mbps
Maximum Transmission Range
2KM
Cable Requirement
Coaxial cable RG59 RG6 cable
Self-network Quantity
2-24 sets (a cable can be connected to 24 sets)
product features
IEEE 1 based P1901 technology supports multimedia services


The measured TCP/IP throughput data is as

Transmission distance: RG59 cable can transmit up to 2000 meters, and keep the TCP/IP transmission rate not lower than 30Mbps. 


The measured TCP/IP throughput data is as follows: 

A) RG59 cable length is less than 400 meters, the throughput data is 92Mbps 

B) RG59 cable length is less than 1000 meters, the throughput data is 74Mbps 

C) RG59 cable length is less than 2000 meters, the throughput data is 30Mbps

General Indicators
Power Supply
DC12V1A (Can share a power supply with a network IP camera)
Power consumption
3W
Operating Temperature
Minus 20 degrees Celsius to 40 degrees Celsius above zero
Relative Humidity
5%-95% Non-condensing




暂无评价

Product Description

      STHA-IP-S turns any analog video cable into a high-speed network connection. This allows analog cameras to be replaced with IP cameras without installing any new cabling, resulting in system cost savings of approximately 30-40%. STHA-IP-S converter uses coaxial cables, GR59 RG6 and other cables to extend the transmission of network signals such as IP cameras, routers, IPTV, etc. to a distance of 2KM; and can transmit multiple IP signals simultaneously through one cable. It can solve the problem of short transmission distance of IP cameras, and the installation is simple, labor-saving and requires no optical fiber.


Application scope

Used to transform existing analog video sites, upgrade analog video surveillance to network IP video surveillance; elevator video surveillance; network IP video remote expansion.


Data sheet
Product Name
IP Network Ethernet to BNC Coaxial RG59 Converter
Model
STHA-IP-S
Chipset used
QCA6410
Flash
8Mbit
Transmission Frequency
2M-30M
Interface
BNC interface*1, RJ45 interface*1
Transmission Rate
maximum 100Mbps
Maximum Transmission Range
2KM
Cable Requirement
Coaxial cable RG59 RG6 cable
Self-network Quantity
2-24 sets (a cable can be connected to 24 sets)
product features
IEEE 1 based P1901 technology supports multimedia services


The measured TCP/IP throughput data is as

Transmission distance: RG59 cable can transmit up to 2000 meters, and keep the TCP/IP transmission rate not lower than 30Mbps. 


The measured TCP/IP throughput data is as follows: 

A) RG59 cable length is less than 400 meters, the throughput data is 92Mbps 

B) RG59 cable length is less than 1000 meters, the throughput data is 74Mbps 

C) RG59 cable length is less than 2000 meters, the throughput data is 30Mbps

General Indicators
Power Supply
DC12V1A (Can share a power supply with a network IP camera)
Power consumption
3W
Operating Temperature
Minus 20 degrees Celsius to 40 degrees Celsius above zero
Relative Humidity
5%-95% Non-condensing



Topology


IP to RG coaxial converter
Model:STHA-IP-S

IP Network Ethernet via RG Line Coaxial Converter

For IP camera system & elevator security system

Analog camera system upgraded to IP camera system

DC12V
长按识别二维码查看详情
长按图片保存/分享
询盘

在线询盘 更多+
  • 联系人 *

  • 手机 *

  • 描述

  • 提交

  • 验证码
    看不清?换一张
    取消
    确定

咨询内容:


你还没有添加任何产品

加入成功

IP to RG coaxial converter

Enquiry
询盘

在线询盘 更多+
  • 联系人 *

  • 手机 *

  • 描述

  • 提交

  • 验证码
    看不清?换一张
    取消
    确定

咨询内容:


你还没有添加任何产品

加入成功

关于我们

关于我们

 

 

产品

IP同轴传输器

HDMI 系列

高清同轴CVI/TVI/AHD光端机

电话光端机

音频光端机

新闻

公司新闻

行业新闻

 

 

联系我们

158 1733 2347

3169306153@qq.com

www.szstta.com

 

暂无链接
在线客服
联系方式
手机
15817332347
二维码
二维码
微信
在线客服
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了